{tv 2 => krebs 3} exim-smarthost

1 files changed, 0 insertions, 475 deletions

diff --git a/tv/2configs/exim-smarthost.nix b/tv/2configs/exim-smarthost.nix
deleted file mode 100644
index c93189b8a..000000000
--- a/tv/2configs/exim-smarthost.nix
+++ /dev/null
@@ -1,475 +0,0 @@
-{ config, pkgs, ... }:
-
-let
-  inherit (builtins) toFile;
-  inherit (pkgs.lib.attrsets) mapAttrs;
-  inherit (pkgs.lib.strings) concatMapStringsSep;
-in
-
-{
-  services.exim =
-    let
-      retiolumHostname = "${config.networking.hostName}.retiolum";
-
-      internet-aliases = with config.krebs.users; [
-        { from = "tomislav@viljetic.de"; to = tv.mail; }
-
-        # (mindestens) lisp-stammtisch und elli haben die:
-        { from = "tv@viljetic.de"; to = tv.mail; }
-
-        { from = "tv@destroy.dyn.shackspace.de"; to = tv.mail; }
-
-        { from = "mirko@viljetic.de"; to = mv.mail; }
-
-        # TODO killme (wo wird die benutzt?)
-        { from = "tv@cd.retiolum"; to = tv.mail; }
-
-        # TODO lists@smtp.retiolum [consul]
-        { from = "postmaster@krebsco.de"; to = tv.mail; }
-      ];
-
-      system-aliases = [
-        { from = "mailer-daemon"; to = "postmaster"; }
-        { from = "postmaster"; to = "root"; }
-        { from = "nobody"; to = "root"; }
-        { from = "hostmaster"; to = "root"; }
-        { from = "usenet"; to = "root"; }
-        { from = "news"; to = "root"; }
-        { from = "webmaster"; to = "root"; }
-        { from = "www"; to = "root"; }
-        { from = "ftp"; to = "root"; }
-        { from = "abuse"; to = "root"; }
-        { from = "noc"; to = "root"; }
-        { from = "security"; to = "root"; }
-        { from = "root"; to = "tv"; }
-        { from = "mirko"; to = "mv"; }
-      ];
-
-      to-lsearch = concatMapStringsSep "\n" ({ from, to }: "${from}: ${to}");
-      lsearch =
-        mapAttrs (name: set: toFile name (to-lsearch set)) {
-          inherit internet-aliases;
-          inherit system-aliases;
-        };
-    in
-    {
-      enable = true;
-      config =
-        ''
-          primary_hostname = ${retiolumHostname}
-
-          # HOST_REDIR contains the real destinations for "local_domains".
-          #HOST_REDIR = /etc/exim4/host_redirect
-
-
-          # Domains not listed in local_domains need to be deliverable remotely.
-          # XXX We abuse local_domains to mean "domains, we're the gateway for".
-          domainlist local_domains    = @ : localhost
-          #: viljetic.de : SHACK_REDIR_HOSTNAME
-          domainlist relay_to_domains =
-          hostlist   relay_from_hosts = <; 127.0.0.1 ; ::1 ; 10.243.13.37
-
-          acl_smtp_rcpt = acl_check_rcpt
-          acl_smtp_data = acl_check_data
-
-          # av_scanner = clamd:/tmp/clamd
-          # spamd_address = 127.0.0.1 783
-
-          # tls_advertise_hosts = *
-          # tls_certificate = /etc/ssl/exim.crt
-          # tls_privatekey = /etc/ssl/exim.pem
-          # (debian) tls_verify_certificates (to check client certs)
-
-          # daemon_smtp_ports = 25 : 465 : 587
-          # tls_on_connect_ports = 465
-
-          # qualify_domain defaults to primary_hostname
-          # qualify_recipient defaults to qualify_domain
-
-          # allow_domain_literals
-
-          never_users = root
-
-          host_lookup = *
-
-          # ident callbacks for all incoming SMTP calls
-          rfc1413_hosts = *
-          rfc1413_query_timeout = 5s
-
-          # sender_unqualified_hosts =
-          # recipient_unqualified_hosts =
-
-          # percent_hack_domains =
-
-          # arch & debian
-          #ignore_bounce_errors_after = 2d
-          #timeout_frozen_after = 7d
-          # debian
-          #smtp_banner = $smtp_active_hostname ESMTP Exim $version_number $tod_full
-          #freeze_tell = postmaster
-          #trusted_users = uucp
-          # arch
-          #split_spool_directory = true
-
-          log_selector = -queue_run +address_rewrite +all_parents +queue_time
-          log_file_path = syslog
-          syslog_timestamp = false
-          syslog_duplication = false
-
-          begin acl
-
-          acl_check_rcpt:
-            # Accept if the source is local SMTP (i.e. not over TCP/IP).
-            # We do this by testing for an empty sending host field.
-            accept  hosts = :
-                    # arch & debian:
-                    control = dkim_disable_verify
-
-            deny    message       = Restricted characters in address
-                    domains       = +local_domains
-                    local_parts   = ^[.] : ^.*[@%!/|]
-
-            deny    message       = Restricted characters in address
-                    domains       = !+local_domains
-                    local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
-
-            accept  local_parts   = postmaster
-                    domains       = +local_domains
-
-            ## feature RETIOLUM_MAIL
-            #accept
-            #  hosts = *.retiolum
-            #  domains = *.retiolum
-            #  control = dkim_disable_verify
-
-            #require verify        = sender
-
-            accept  hosts         = +relay_from_hosts
-                    control       = submission
-                    # debian: control = submission/sender_retain
-                    # arch & debian:
-                    control       = dkim_disable_verify
-
-            accept  authenticated = *
-                    control       = submission
-                    control       = dkim_disable_verify
-
-            accept message = relay not permitted 2
-                    recipients = lsearch;${lsearch.internet-aliases}
-
-            require message = relay not permitted
-                    domains = +local_domains : +relay_to_domains
-
-            require
-              message = unknown user
-              verify = recipient/callout
-
-            # deny    message       = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text
-            #         dnslists      = black.list.example
-            #
-            # warn    dnslists      = black.list.example
-            #         add_header    = X-Warning: $sender_host_address is in a black list at $dnslist_domain
-            #         log_message   = found in $dnslist_domain
-
-            # Client SMTP Authorization (csa) checks on the sending host.
-            # Such checks do DNS lookups for special SRV records.
-            # require verify = csa
-
-            accept
-
-
-          acl_check_data:
-            # see av_scanner
-            #deny    malware    = *
-            #        message    = This message contains a virus ($malware_name).
-
-            # Add headers to a message if it is judged to be spam. Before enabling this,
-            # you must install SpamAssassin. You may also need to set the spamd_address
-            # option above.
-            #
-            # warn    spam       = nobody
-            #         add_header = X-Spam_score: $spam_score\n\
-            #                      X-Spam_score_int: $spam_score_int\n\
-            #                      X-Spam_bar: $spam_bar\n\
-            #                      X-Spam_report: $spam_report
-
-            # feature HELO_REWRITE
-            # XXX note that the public ip (162.219.5.183) resolves to viljetic.de
-            warn
-              sender_domains = viljetic.de : shackspace.de
-              set acl_m_special_dom = $sender_address_domain
-
-            accept
-
-
-          begin routers
-
-          # feature RETIOLUM_MAIL
-          retiolum:
-            debug_print = "R: retiolum for $local_part@$domain"
-            driver = manualroute
-            domains = ! ${retiolumHostname} : *.retiolum
-            transport = retiolum_smtp
-            route_list = ^.* $0 byname
-            no_more
-
-          internet_aliases:
-            debug_print = "R: internet_aliases for $local_part@$domain"
-            driver = redirect
-            data = ''${lookup{$local_part@$domain}lsearch{${lsearch.internet-aliases}}}
-
-          dnslookup:
-            debug_print = "R: dnslookup for $local_part@$domain"
-            driver = dnslookup
-            domains = ! +local_domains
-            transport = remote_smtp
-            ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
-            # if ipv6-enabled then instead use:
-            # ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1
-
-            # (debian) same_domain_copy_routing = yes
-            # (debian) ignore private rfc1918 and APIPA addresses
-            # (debian) ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
-            #                   172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\
-            #                   255.255.255.255
-
-            # Fail and bounce if the router does not find the domain in the DNS.
-            # I.e. no more routers are tried.
-            # There are a few cases where a dnslookup router will decline to accept an
-            # address; if such a router is expected to handle "all remaining non-local
-            # domains", then it is important to set no_more.
-            no_more
-
-          # XXX this is only used because these "well known aliases" goto tv@cd.retiolum
-          # TODO bounce everything, there is no @cd.retiolum
-          system_aliases:
-            debug_print = "R: system_aliases for $local_part@$domain"
-            driver = redirect
-            data = ''${lookup{$local_part}lsearch{${lsearch.system-aliases}}}
-
-          # TODO this is only b/c mv here... send mv's mails somewhere else...
-          local_user:
-            debug_print = "R: local_user for $local_part@$domain"
-            driver = accept
-            check_local_user
-          # local_part_suffix = +* : -*
-          # local_part_suffix_optional
-            transport = home_maildir
-            cannot_route_message = Unknown user
-
-          begin transports
-
-          retiolum_smtp:
-            driver = smtp
-            retry_include_ip_address = false
-            # serialize_hosts = TODO-all-slow-hosts
-
-          remote_smtp:
-            driver = smtp
-            # debian has also stuff for tls, headers_rewrite and more here
-
-            # feature HELO_REWRITE
-            # XXX note that the public ip (162.219.5.183) resolves to viljetic.de
-            helo_data = ''${if eq{$acl_m_special_dom}{}  \
-                                 {$primary_hostname}   \
-                                 {$acl_m_special_dom} }
-
-          home_maildir:
-            driver = appendfile
-            maildir_format
-            maildir_use_size_file
-            directory = $home/Mail
-            directory_mode = 0700
-            delivery_date_add
-            envelope_to_add
-            return_path_add
-
-          begin retry
-          *.retiolum             *           F,42d,1m
-          *                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h
-
-          begin rewrite
-          begin authenticators
-        '';
-
-
-          # group = mail
-          # mode = 0660
-
-
-          #address_pipe:
-          #  driver = pipe
-          #  return_output
-          #
-          #address_file:
-          #  driver = appendfile
-          #  delivery_date_add
-          #  envelope_to_add
-          #  return_path_add
-          #
-          #address_reply:
-          #  driver = autoreply
-
-
-          #maildrop_pipe:
-          #  debug_print = "T: maildrop_pipe for $local_part@$domain"
-          #  driver = pipe
-          #  path = "/bin:/usr/bin:/usr/local/bin"
-          #  command = "/usr/bin/maildrop"
-          #  return_path_add
-          #  delivery_date_add
-          #  envelope_to_add
-
-
-
-
-
-          ##begin retry
-          # Address or Domain    Error       Retries
-
-          # Our host_redirect destinations might be offline a lot.
-          # TODO define fallback destinations(?)
-          #lsearch;${lsearch.internet-aliases} * F,42d,1m
-
-
-          ## begin rewrite
-
-          # just in case (shackspace.de should already do this)
-          #tv@shackspace.de  tv@SHACK_REDIR_HOSTNAME  T
-
-
-          ## begin authenticators
-          #PLAIN:
-          #  driver                  = plaintext
-          #  server_set_id           = $auth2
-          #  server_prompts          = :
-          #  server_condition        = Authentication is not yet configured
-          #  server_advertise_condition = ''${if def:tls_in_cipher }
-
-          #LOGIN:
-          #  driver                  = plaintext
-          #  server_set_id           = $auth1
-          #  server_prompts          = <| Username: | Password:
-          #  server_condition        = Authentication is not yet configured
-          #  server_advertise_condition = ''${if def:tls_in_cipher }
-
-
-
-      };
-
-}
-
-#        config = ''
-#          primary_hostname = ${retiolumHostname}
-#          domainlist local_domains    = @ : localhost
-#          domainlist relay_to_domains = *.retiolum
-#          hostlist   relay_from_hosts = <; 127.0.0.1 ; ::1
-#
-#          acl_smtp_rcpt = acl_check_rcpt
-#          acl_smtp_data = acl_check_data
-#
-#          host_lookup = *
-#          rfc1413_hosts = *
-#          rfc1413_query_timeout = 5s
-#
-#          log_file_path = syslog
-#          syslog_timestamp = false
-#          syslog_duplication = false
-#
-#          begin acl
-#
-#          acl_check_rcpt:
-#            accept  hosts = :
-#                    control = dkim_disable_verify
-#
-#            deny    message       = Restricted characters in address
-#                    domains       = +local_domains
-#                    local_parts   = ^[.] : ^.*[@%!/|]
-#
-#            deny    message       = Restricted characters in address
-#                    domains       = !+local_domains
-#                    local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
-#
-#            accept  local_parts   = postmaster
-#                    domains       = +local_domains
-#
-#            #accept
-#            #  hosts = *.retiolum
-#            #  domains = *.retiolum
-#            #  control = dkim_disable_verify
-#
-#            #require verify        = sender
-#
-#            accept  hosts         = +relay_from_hosts
-#                    control       = submission
-#                    control       = dkim_disable_verify
-#
-#            accept  authenticated = *
-#                    control       = submission
-#                    control       = dkim_disable_verify
-#
-#            require message = relay not permitted
-#                    domains = +local_domains : +relay_to_domains
-#
-#            require verify = recipient
-#
-#            accept
-#
-#
-#          acl_check_data:
-#            accept
-#
-#
-#          begin routers
-#
-#          retiolum:
-#            driver = manualroute
-#            domains = ! ${retiolumHostname} : *.retiolum
-#            transport = remote_smtp
-#            route_list = ^.* $0 byname
-#            no_more
-#
-#          nonlocal:
-#            debug_print = "R: nonlocal for $local_part@$domain"
-#            driver = redirect
-#            domains = ! +local_domains
-#            allow_fail
-#            data = :fail: Mailing to remote domains not supported
-#            no_more
-#
-#          local_user:
-#            # debug_print = "R: local_user for $local_part@$domain"
-#            driver = accept
-#            check_local_user
-#          # local_part_suffix = +* : -*
-#          # local_part_suffix_optional
-#            transport = home_maildir
-#            cannot_route_message = Unknown user
-#
-#
-#          begin transports
-#
-#          remote_smtp:
-#            driver = smtp
-#
-#          home_maildir:
-#            driver = appendfile
-#            maildir_format
-#            directory = $home/Maildir
-#            directory_mode = 0700
-#            delivery_date_add
-#            envelope_to_add
-#            return_path_add
-#          # group = mail
-#          # mode = 0660
-#
-#          begin retry
-#          *.retiolum             *           F,42d,1m
-#          *                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h
-#
-#          begin rewrite
-#
-#          begin authenticators
-#        '';
-#      };
-#}